PD 3/8-0

RAYCHEM Tubing Products 1 PD Caps Heat-shrinkable Tubing Semirigid, Encapsulant-Lined, Polyolefin Caps Product Facts 3:1 shrink ratio Permanent or temporary way to terminate wires ■ Rapid, simple installation ■ Rugged protection against abrasion, vibration, and flexing ■ PD caps provide a splashresistant, moisture-resistant covering (but not intended for use where immersion in fluids is required) ■ RoHS compliant ■ ■ Specifications/Approvals Applications Installation Operating Temperature Range PD Caps offer an improved, inexpensive way to encapsulate crimped electrical connections, including those on motor coils. Their encapsulant lining melts and flows to fill surface irregularities of the substrate. These vibrationproof caps are used to insulate and terminate dead-end electrical cables, fixtures, connectors, and other electrical components. Minimum shrink temperature: 125°C [257°F] -55°C to 110°C [-67°F to 230°F] Minimum full recovery temperature: 135°C [275°F] Series UL Raychem PD Caps E85381 600 V, 125°C PD Caps SCD Available in: Americas Europe Asia Pacific ■ ■ ■ 1-71 9-1773447-9 CIS WR 08/2011 te.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-475-6222 Mexico: 52-55-1106-0800 L. & S. America: 54-11-4733-2200 Germany: 49-6251-133-1999 China: 86-400-820-6015 Japan: 81-44-844-8013 UK: 44-800-267-666 RAYCHEM Tubing Products PD Caps (Continued) Product Dimensions Size 1/8 3/16 1/4 3/8 1/2 Length Nominal Minimum Open Overall as Barrel as Supplied* Supplied 25.4 [1.00] 12.7 [0.50] 25.4 [1.00] 15.2 [0.60] 28.4 [1.12] 15.2 [0.60] 31.8 [1.25] 18.3 [0.72] 38.1 [1.50] 21.6 [0.85] Inside Diameter Minimum Maximum Expanded Recovered as Supplied After Heating 3.18 [0.125] 0.58 [0.023] 4.75 [0.187] 1.52 [0.060] 6.35 [0.250] 2.03 [0.080] 9.53 [0.375] 2.29 [0.090] 12.70 [0.500] 2.29 [0.090] Recovered Wall Thickness** Total Wall After Heating 1.22 ± 0.15 [0.048 ± 0.006] 1.57 ± 0.20 [0.062 ± 0.008] 1.98 ± 0.25 [0.078 ± 0.010] 2.08 ± 0.25 [0.082 ± 0.010] 2.54 ± 0.25 [0.100 ± 0.010] *See glossary for definition of “barrel.” **Wall thickness will be less if recovery is restricted during shrinkage. Ordering Information Color Size selection Standard packaging Ordering description Standard Black (-0) Always order the largest size that will shrink snugly over the component to be covered. Special order sizes are available upon request. In pieces. Specify product name, size and color (for example, PD Caps 1/4-0). 1-72 9-1773447-9 CIS WR 08/2011 te.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-475-6222 Mexico: 52-55-1106-0800 L. & S. America: 54-11-4733-2200 Germany: 49-6251-133-1999 China: 86-400-820-6015 Japan: 81-44-844-8013 UK: 44-800-267-666